Electro Hydraulic Automobile Lifting Systems – All in One Repair Station
Features: Single repair station for wheel alignment, balancing, tyre rotation and routine service of Cars. Lifting capacity – 3.5 Tons. Lifting height – 1.8 meters. Second lifting height – 450 mm. Concealed in ground installation. Optional – Pneumatic Wheel Opener, Tyre Inflator & Oil Dispenser attachments . Technical Specification: Lifting Capacity : 3500 kgs. Lifting Height : 1850 mm Width : 1960 mm Air Pressure :6-8 kgs/cm2 Power Supply : 380V-50Hz, 3 Phase
Electro Hydraulic Automobile Lifting Systems
Features : Electro-mechanical by screw-nut Bearing & safety nuts same dimensions of certified quality Computerised control unit Electronic control of the equal level of the columns Graphic visualisation of the functioning and of the lifting height of each columns on a bug crystal display Self-diagnosis and visualisation on the display of any damage control unit mounted on the master column or installed on a mobile console (optional) Safety: Programmed compulsory maintenance Key selector for emergency descent incase of electronical failure Great stability thanks to a very large face of the holding frame (1.2 m) Visualisation of the nut wear by visual gauge or caliber Low tension “dead man” control buttons & mushroom type emergency button Double end-stroke safety system : electronic & mechanical Obstacle detector during the descent Technical Specification: Type : SCM 75 Capability (each column) (Ton) : 9 Lifting stroke (mm) : 170 Lifting time (mm/s) : 165 Motor power (each column) (Kw) : 4 Weight (each column) : 600
Automatic AC Gas Charging System
Features : Refrigerant recovery, vacuum, recycle, purify and recharging system. Drain and charge Compressor oil with push of a button. No manual valve or other manual operation after parameter setting and hose connection. Low pressure protection avoids air coming into system and assures high refrigerant quality. Leakage hunting function. Liquid crystal display offer operation prompts and machine service prompts. Non-condensable gas in cylinder purge automatically. Optional function : Pipe flushing and leakage hunting with nitrogen gas Technical Specification : Input Power : 500 W Refrigerant Type : 134a Recovery peed : 350 g/min Charging Speed : 900 g/min Net Weight : 85 kg Dimension mm : 640x580x1130 ACM 2 AC system can handle R-12 and R-134a gases simultaneously with two set of separate refrigerant circuits
Automobile AC Gas Handling System
Features : Refrigerant recovery, recycle, vacuum, and recharging system. Manual valve and manual parts operation including oil charging. Drain and charge compressor oil with push of a button Low pressure protection avoids air coming into system and assures high refrigerant quality. Liquid crystal display offer operation prompts and machine service prompts . Technical Specification : Input Power : 500 W Refrigerant Type : 134a Recovery peed : 350 g/min Charging Speed : 900 g/min Net Weight : 85 kg Dimension mm : 640x580x1130
Parts Cleaner Machine
Technical Specification : Motor : 1.5 HP No. of Nozzle : 24 Pressure : 120 PSI Chemical : Diesel/Kerosene Oil Filter : 3 Step Filtration Illumination : 60 Watt ACM 2 AC system can handle R-12 and R-134a gases simultaneously with two set of separate refrigerant circuits
Coolant Flushing Machine
Jetage cooling system cleaner is designed to clean the cooling system dynamically, statically. This equipment is the most advanced, multi-function and best clean efficacy model among the similar machine so far. Technical Specification : Input voltage : 12V DC Air source pressure : 60 Tap water pressure : 0.7kg/cm2 Rated carburetor pressure : 5-15 Dimension (mm) : 620x440x1010
Fuel Injector Tester And Cleaner-6 Station
Features : The machine has four pre set automatic programmes. The operator can further design four programmes like RPM, Pulse duration, Injection time and Injection numbers etc. as per requirement. 100 Watts /25KHz ultrasonic diagnostic and cleaning of injectors, with capacity of stainless steel tank for 1 liter. Perform diagnostic of Flow/Equalization, leak test, Injection pattern, cleaning and reverse washing for injectors. Includes liquid temperature overheat warning function and combustible gas warning. Technical Specification : Max. Testing Cylinder : 6 Nos. Rotation Speed : 0-7500 rpm Pulse Duration : 0-20 ms Injection Number of times : 0-9900 Injecting time : 0-10 sec. Oil Pressure : 6.5 kg/cm2 Test Liquid Tank Volume : 2.21 Testing Tube Volume : 140 ml Ultrasonic Frequency : 28.5 Ultrasonic Power : 70W Oil tank level indicator : Yes
Vacuum Pumps
Engineered for compactness, economy and dependability–Shree Sai Enterprises’s Vacuum Pumps are the number one choice for demanding applications, providing top operating efficiency combined with low maintenance. And best of all, these vacuum pumps are backed by Shree Sai Enterprises, the world’s leader in air compressor and pump manufacturing. Features: 100% cast iron frame and cylinders for durability and long life Separately cast cylinders with deep fins for improved cooling and efficiency Low oil level switch standard on all packages to prevent compressor from potential damages due to low oil level Easily accessible stainless steel valve and one piece connecting rod improves serviceability and reduces cost of maintenance Maximum vacuum of 29” Hg
Standard Cast & Fabricated
Capacity Range: 21-17000 cfm (0.6-468 m3/min) Filtration Grades: General purpose, high efficiency, dust particle, activated carbon ISO Class 1 & 2 Maximum Operating Pressure: 232 psig (16 barg) Maximum Operating Temperature: 150°F (66°C), 86°F (30°C) for activated carbon Minimum Operating Temperature: 34°F (1°C) Features: Low pressure drop design No touch element replacement Low energy consumption Threaded & flanged connections
Energy Efficient Filtration: NL Modules
Capacity Range: 125-10000 cfm (3.5-283.2 m3/min) Filtration Grades: High efficiency Pressure Drop: 0.5 psig (0.03 barg) Maximum Operating Pressure: 150 psig (10.3 barg) Maximum Operating Temperature: 125°F (52°C) Minimum Operating Temperature: 34°F (1°C) Element Life: 10 years Features: High air quality Low pressure drop design Long element life Low energy consumption Threaded & flanged connections